16x16 16:16 HDMI Matrix Switcher UHD 4K2K RS232 Full EDID Learning/Mgmt SB-5669K

The SB-5669K is ShinybowUSA's next-generation HDMI Matrix Switch, with 16 HDMI inputs and 16 HDMI outputs located on the back panel. This professional switcher has full EDID management and EDID memory, including a new feature called Fast Speed Start which permits switching between HDMI sources in as little as 2 seconds. The SB-5669K is certified as being fully CEC and HDCP 2.0 compliant, and supports HDMI 4K2K and v1.4a 3D formats, with data rates up to 6.75 Gbps.

There are 7 selectable embedded EDID modes: FSS (fast speed start), H24-3D, H24-3D-M, H36-3D, H36-3D-M, 4K2K-3D, DVI-D 1920x1200-60Hz. There is also a learning mode button on the front panel (learning destination EDID link to source device). Full function front panel controls are: ALL / OFF / EDID / LOCK / RECALL / MEMORY / ENTER.

The SB-5669K has an LCD display on the front panel which shows current routing status of all inputs to outputs and allows for easy setup of EDID modes. Control of the device is achieved through front panel pushbuttons, RS-232 connection, IR Remote, or IP. The RS-232 connection allows functions to be controlled by systems like Control4 (drivers included) or any computerized software/hardware control system. The IP (Ethernet) port supports serial commands from any device when using the provided software that redirects COM ports to an IP address set in the SB-5669K.

Because the SB-5669K is a matrix routing switch, a one-to-many, many-to-one connection can be established. You can easily connect any input device to any output device, eliminating the need to constantly re-route video input and output cables. A rack mount kit, IR remote, IR extender, RS232 cable, and RS232 driver CD are included for easy, professional installation.